Feed and Nutrition Management for Cattle

Feed And Nutrition Management for Cattle

On today’s discussion, we are going to look at the feed and nutrition Management for Cattle. It’s very essential that you give the right quantity and type of feed to your cattle.

The success of your cattle fattening business depends on the ability of the cattle to gain weight and to produce high quality beef.

These factors are affected by the quality and quantity of feed. The proper feeding techniques will ensure that the cattle will grow and utilize the feed efficiently and produce good quality beef.

This will maximize your profits of the cattle fattening farming business. Failing to properly feed the cattle will lead to losses. The losses will be due to failure to meet the target slaughter weights and beef quality grade.

There are companies which sell cattle fattening stock feeds. These are complete, balanced feeds, which are designed for fattening cattle in feedlots over 90 days.

See Also: 12 Management Tips for Better Poultry Performance Potential

The stock feeds are high energy fattening meals which contain all the nutrients necessary for ad lib cattle pen fattening. You can also make your own home made cattle beef fattening feeds.

Feed And Nutrition Management for Cattle

The amount of feed consumed by the cattle daily will depend on factors such as live weight and age of the cattle.

Normally, it averages between 8-15kg per head per day or 3.4% of a steer’s live mass per day. The average daily weight gain at 350Kg live mass is about 1.6Kg.

When you sell your cattle to the abattoir or butcher, they will slaughter it and grade the beef according to its quality.

Beef is graded in two ways: quality grades for tenderness, juiciness and flavor; and yield grades for the amount of usable lean meat on the carcass.

After fattening cattle in feedlots for 90 days, its beef should fetch the highest quality grade. This grade is usually called Prime beef or Super beef. This is the beef which fetches the highest price on the market.

The purpose of cattle fattening is to increase the weight of the cattle over 90 days (more weight, more money when you sell) and to increase the quality of the beef (higher grade of beef, more money when you sell).

Feeds for beef cattle vary widely in quality, palatability, and essential nutrient content. To be most effective, any supplement must be patterned to fit the kind and quality of roughage available.

Chemical analyses of roughages are very useful to determine their nutrient deficiencies and adequacies. Under certain systems of management, beef cattle are wintered on low-quality roughages and thus may not receive the recommended nutrients for optimal performance.

If heifers are fed low-quality roughages during winter, they will produce inadequate quality and quantity of colostrum, take longer to deliver their calves, and have poor rebreeding rates.

This can be prevented by ensuring that heifers are fed a balanced ration that will allow them to calve in body condition score 6.5–7 (0–9 scale). Cattle should always be fed an adequate ration that allows them to thrive in their given environment.

Read Also: The Different Types of Manure and How the Work

The Breeding Herd

In many areas, producers follow a late winter/early spring calving program (February to May in the USA), depending on the available feed, growth of early pasture, and prevailing climate. Fall calving has become more prevalent, particularly in the south. Wintering the lactating cow presents a much greater nutritional problem than does wintering the pregnant, nonlactating cow.

Spring-born calves commonly are weaned at 6–7 mo, and their dams bred back while on pasture. Heifers may be bred to calve first as 2-yr-olds (22–25 mo) if good winter feeding is practiced to ensure adequate development. Heifers should weigh 55%–60% of mature body wt at breeding time and should be fed well thereafter to allow for continued growth, good milk production, and prompt rebreeding.

Mature cows have greater body reserves and lower nutrient requirements than heifers; therefore, they can be wintered on rations of poorer quality. Their ration should provide a minimum of 8% total or crude protein in the dry matter; if it does not, then 1–2 lb (0.5–1 kg) of a 20%–30% protein supplement or its equivalent should be fed daily. A mineral mix and salt should be provided. Cows should calve in body condition score 5.5–6 (0–9 scale).

Under profitable systems of management, a mature beef cow should maintain her weight from fall to fall. Lactation requires more nutrients than gestation. However, feeding beef cows more than is necessary for satisfactory production, such as is frequently done in purebred herds and show herds, is also undesirable. Large accumulations of body fat may lead to lowered conception rates, difficult calving, a lower calf crop, and a shorter life span for the cow.

A system of “creep feeding” can be practiced in which suckling calves are allowed access to a grain mixture in a self-feeder in an enclosure or to high-quality forage in an adjacent pasture where only calves have access. A creep-feed mixture of high-fiber co-product feeds such as corn gluten, dry distiller’s grains, and soyhulls can be combined with a salt-vitamin-mineral mix to provide a palatable ration for the calves. The mixture should be rather large particles to prevent dustiness. A commercial 14%–16% protein creep feed may be used as an alternative.

Growing bull calves should also receive a balanced ration. Young bulls should not be fed large amounts of starch, with gains of 2.5–3.5 lb (1.1–1.6 kg) per day being very adequate. Yearling bulls grown on extremely high energy diets are more likely to have disease issues and reduced longevity in the breeding herd. Mature bulls commonly are wintered in the same manner as the cow herd, with a greater feed allowance during the late winter.

In highly fitted show bulls, a gradual reduction in the ration and much exercise are needed before they will be in suitable shape and condition for pasture breeding. Breeding stock should have adequate nutrients in their ration and be gaining weight before and during the breeding season.

Deficiency of several nutrients, especially carotene, phosphorus, energy, and protein, reduces fertility. These nutrients should be present in adequate amounts in the ration at least 6–8 wk before breeding.

Read Also: List of Problems Confronting Livestock Production

Stocker Cattle

It is common practice to feed calves and yearlings to make moderate gains in winter, with faster and less expensive gains on summer pasture. Such cattle may be sold as feeders in the spring or finished out in dry lot the following fall.

The cost of winter gain on harvested feeds invariably is higher than summer gain on pasture; hence, it is advisable to winter cattle so as to make the greatest possible gains on pasture. To maintain good health, weanling calves should gain >1 lb (0.5 kg)/day.

Two pounds (1 kg) of grain plus 1–2 lb (0.5–1 kg) of protein supplement are recommended in addition to nonlegume roughage. If legume roughage is fed, no protein supplement is needed. Older cattle, particularly if they enter the winter in fleshy condition, may just maintain their weight.

A free-choice mineral mixture with trace mineralized salt should be supplied. Limited amounts of grain fed to yearling cattle on pasture during the late summer may increase their market value.

Finishing Cattle

This phase of beef production consists of full feeding of grain with limited amounts of roughage until market weight and finish are reached. Older cattle may reach finish weight on pasture alone (or with only a few pounds of grain/day) or after 60–90 days in the feedlot on high-grain rations to improve market grade and to remove any yellow tinges from their body fat (due to stored carotene from pasture forage).

Weanling calves can be shipped directly to the feedlot and fed finishing rations for 150–250 days, whereas yearlings require ~150 days.

Grain consumption of cattle on full-feed is ~2–2.5 lb/100 lb (1 kg/45 kg) body wt. Roughage consumption usually is limited to approximately one-fourth to one-third of the total concentrate consumption after cattle are on full-feed.

Cattle consume ~3% of their body wt/day when self-fed mixed rations. For calves, ~1.5–2 lb (<1 kg) of a 33% protein supplement is required daily for best gains and market grades when nonlegume roughage is fed.

The grain (concentrate) allowance for finishing cattle should be increased gradually over 2–3 wk from the time they are started on a finishing program to get them on full feed. Feeding too much grain to finishing cattle too rapidly can lead to lactic acidosis or founder.

Do you have more ideas or questions regarding the Feed And Nutrition Management for Cattle? If yes then feel free to contribute using the comment box below.

VISIT ALSO

www.Agric4Profits.com

www.WorldMarketSite.com

Related posts

3 Thoughts to “Feed and Nutrition Management for Cattle”

  1. […] Related: Feed and Nutrition Management for Cattle […]

Leave a Comment